Logo UMK Expert

PROF. IR. DR. JULIE JULIEWATTY BINTI MOHAMED

FACULTY OF BIOENGINEERING AND TECHNOLOGY
juliewatty.m@umk.edu.my
09-7797781
PENSYARAH UNIVERSITI (TETAP)

CV
GROUP OF EXPERTISE
  1. STRUCTURAL PIEZOELECTRIC, AND DIELECTRIC PROPERTIES OF PZT-BASED CERAMICS WITHOUT EXCESS LEAD OXIDE | CO | 2020-06
  2. AUGMENTATION OF THE DELAMINATION FACTOR IN DRILLING OF CARBON FIBRE-REINFORCED POLYMER COMPOSITES (CFRP) | CO | 2020-11
  3. ASSESSMENT OF ELECTRIC ARC FURNACE (EAF) STEEL SLAG WASTE¿S RECYCLING OPTIONS INTO VALUE ADDED GREEN PRODUCTS: A REVIEW | CO | 2020-10
  4. WIDEBAND FREQUENCY TUNABILITY OF CACU3TI4O12-BASED DIELECTRIC RESONATOR ANTENNAS VIA THE ADDITION OF GLASS | CO | 2020-07-01
  5. RECYCLING FOOD, AGRICULTURAL, AND INDUSTRIAL WASTES AS PORE-FORMING AGENTS FOR SUSTAINABLE POROUS CERAMIC PRODUCTION: A REVIEW | CO | 2021-07
  6. APPLICATION OF GENERAL FULL FACTORIAL STATISTICAL EXPERIMENTAL DESIGN¿S APPROACH FOR THE DEVELOPMENT OF SUSTAINABLE CLAY-BASED CERAMICS INCORPORATED WITH MALAYSIA¿S ELECTRIC ARC FURNACE STEEL SLAG WASTE | CO | 2021-04
  7. PRELIMINARY ASSESSMENT OF RECYCLING MALAYSIA¿S ELECTRIC ARC FURNACE (EAF) STEEL SLAG WASTE AS ONE OF RAW MATERIALS FOR GEOPOLYMER CERAMIC PRODUCT | CO | 2021-06
  8. EFFECTS OF ADDITIVES ADDITIONS AND SINTERING TECHNIQUES ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF ZIRCONIA TOUGHENED ALUMINA (ZTA): A REVIEW | CO | 2022-08
  9. DEVELOPMENT OF A NUCLEIC ACID-BASED SCREEN PRINTED ELECTROCHEMICAL BIOSENSOR USING TI3C2TX-MXENE FOR THE DETECTION OF SARS-COV-2 | CO | 2023
  10. DEVELOPMENT OF MAGNESIUM DIBORIDE SUPERCONDUCTING WIRES THROUGH HOT WORKING WITH DIFFERENT INITIAL FILLING DENSITY | CO | 2023
  11. A CRITICAL REVIEW ON THE DEVELOPMENT OF MULTI-GEOMETRICAL STACKED WIDEBAND DIELECTRIC RESONATOR ANTENNA | CO | 2024-09
  12. EFFECT OF MAGNESIUM OXIDE (MGO) AS AN ANTIFUNGAL AGENT ON SINGGORA ROOF TILE | CO | 2024-12-06
  13. PHASE AND THERMAL PROPERTIES OF CALCIUM COPPER TITANATE (CACU3TI4O12)/BARIUM TITANATE (BATIO3) COMPOSITES | CO | 2023
  14. MICROBIAL USE AS AN AGENT TO IMPROVE THE DURABILITY OF SUB-STRUCTURE CONCRETE: A COMPREHENSIVE STRUCTURED REVIEW | CO | 2024
  15. ZN-DOPED CALCIUM COPPER TITANATE SYNTHESIS VIA MICROWAVE-ASSISTED TECHNIQUE | CO | 2024
  16. MECHANICAL PROPERTIES OF ANNEALED SODA LIME SILICA GLASS WITH VARIOUS POTASSIUM SALT BY ION EXCHANGE | CO | 2024
  17. A STRUCTURE REVIEW ON CALCIUM COPPER TITANATE (CCTO) FOR ENHANCEMENT OF DIELECTRIC RESONATOR ANTENNA | CO | 2024-06-30
  18. AUGMENTATION OF THE DELAMINATION FACTOR IN DRILLING OF CARBON FIBRE-REINFORCED POLYMER COMPOSITES (CFRP) | CO | 2020-11
  19. ASSESSMENT OF ELECTRIC ARC FURNACE (EAF) STEEL SLAG WASTE¿S RECYCLING OPTIONS INTO VALUE ADDED GREEN PRODUCTS: A REVIEW | CO | 2020-10
  20. RECYCLING FOOD, AGRICULTURAL, AND INDUSTRIAL WASTES AS PORE-FORMING AGENTS FOR SUSTAINABLE POROUS CERAMIC PRODUCTION: A REVIEW | CO | 2021-07
  21. EFFECTS OF ADDITIVES ADDITIONS AND SINTERING TECHNIQUES ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF ZIRCONIA TOUGHENED ALUMINA (ZTA): A REVIEW | CO | 2022-08
  22. DEVELOPMENT OF A NUCLEIC ACID-BASED SCREEN PRINTED ELECTROCHEMICAL BIOSENSOR USING TI3C2TX-MXENE FOR THE DETECTION OF SARS-COV-2 | CO | 2023
  23. A CRITICAL REVIEW ON THE DEVELOPMENT OF MULTI-GEOMETRICAL STACKED WIDEBAND DIELECTRIC RESONATOR ANTENNA | CO | 2024-09
  24. STRUCTURAL PIEZOELECTRIC, AND DIELECTRIC PROPERTIES OF PZT-BASED CERAMICS WITHOUT EXCESS LEAD OXIDE | CO | 2020-06
  25. WIDEBAND FREQUENCY TUNABILITY OF CACU3TI4O12-BASED DIELECTRIC RESONATOR ANTENNAS VIA THE ADDITION OF GLASS | CO | 2020-07-01
  26. DEVELOPMENT OF MAGNESIUM DIBORIDE SUPERCONDUCTING WIRES THROUGH HOT WORKING WITH DIFFERENT INITIAL FILLING DENSITY | CO | 2023
  1. THERMAL ANALYSIS OF CA1+XCU3TI4O12+X PRECURSOR IN NITROGEN AND OXYGEN ENVIRONMENT AT 1000 | MAIN | 2020
  2. THE EFFECT OF CALCIUM CARBONATE ADDED INTO MAMBONG CLAY | CO | 2020
  3. POTENTIAL RECYCLING OF METALLURGICAL SLAG WASTE INTO GEOPOLYMER PRODUCTS: A BRIEF REVIEW | CO | 2020-09
  4. INVESTIGATION OF CACU3TI4O12 PRECURSOR BY SIMULTANEOUS TGA AND DSC ANALYSIS IN OXYGEN ENVIRONMENT | CO | 2020
  5. MICROSTRUCTURAL AND DIELECTRIC RESPONSES OF CALCIUM COPPER TITANATE ADDED SODA-LIME GLASS FOR HIGH FREQUENCY DEVICES | CO | 2020
  6. DIELECTRIC BREAKDOWN STRENGTH AND ENERGY STORAGE DENSITY OF CCTO-ZBS ELECTROCERAMIC | CO | 2020-12-28
  7. EFFECT OF ZNFE2O4FILLER LOADING ON THE MORPHOLOGY AND MECHANICAL PROPERTIES OF EPOXIDISED NATURAL RUBBER 25 (ENR 25) | CO | 2020-12-28
  8. INFLUENCE OF VULCANIZATION SYSTEM ON THE MECHANICAL PROPERTIES OF CCTO/ENR50 COMPOSITE | CO | 2020-12-28
  9. THE COMPARISON BETWEEN SAMARIUM DOPED NICKEL OXIDE AND SAMARIUM ADDED NICKEL OXIDE ON DIELECTRIC PROPERTIES | CO | 2020-12-28
  10. THE STUDY OF MAMBONG CLAY PROPERTIES IMPROVEMENT WITH CALCIUM CARBONATE ADDITION | CO | 2020-12-28
  11. INFLUENCE OF FELDSPAR ADDITION ON THE PROPERTIES OF CACU3TI4O12 CERAMIC | CO | 2022
  12. DIELECTRIC PROPERTIES OF LOW CONCENTRATION BARIUM DOPED K0.5NA0.5NBO3 LEAD FREE CERAMICS PREPARED VIA SOLID STATE REACTION METHOD | MAIN | 2022
  13. THERMAL PROPERTIES OF NONSTOICHIOMETRIC CA1+XCU3TI4-XO12-2XCERAMIC MATERIALS IN NITROGEN AND OXYGEN ENVIRONMENT | CORRESPNDG | 2022
  14. SPECIFIC HEAT AND ENTHALPY OF CRYSTALLIZATION CACU3+ XTI4O12+ XIN TGA AND DSC ISOTHERMAL OXIDATION AT 1000 °C | CO | 2022
  15. PHYSICAL, MICROSTRUCTURE ENHANCEMENT OF K0.5NA0.5NBO3- BASED LEAD-FREE CERAMICS PREPARED VIA TWO-STEP SINTERING | CO | 2022
  16. OPTIMIZATION OF WOOD SAW DUST (WSD) AS PORE FORMING AGENT FOR POROUS CERAMIC USING RESPONSE SURFACE METHODOLOGY (RSM) STATISTICAL DESIGN | CO | 2022
  17. OPTIMIZATION OF VULCANISATION SYSTEM ON THE RHEOLOGICAL AND THERMAL PROPERTIES OF ENR-50 FILLED CCTO COMPOSITE | CO | 2022
  18. SYNTHESIS AND CHARACTERIZATION OF CA-LESS CCTO DIELECTRIC ELECTROCERAMIC MATERIALS | CORRESPNDG | 2022
  19. CALCIUM CARBONATE (CACO3) CONTENTS INFLUENCE THE PROPERTIES OF MAMBONG CLAY | MAIN | 2022
  20. CLAY CHARACTERIZATIONS IN KAMPUNG KOR AND KAMPUNG SERIBONG, KOTA BHARU BY USING SLIP CASTING | CORRESPNDG | 2022
  21. EFFECT OF KAOLIN-ALUMINA RATIO ON PHYSICAL AND STRUCTURAL PROPERTIES OF CERAMIC PORCELAIN | CO | 2022
  22. ANTIFUNGAL ACTIVITY OF TITANIUM DIOXIDE ON FUNGAL ISOLATED FROM SINGGORA ROOF TILE | CO | 2022-06
  23. EFFECT OF SINTERING TIME ON THE DIELECTRIC PROPERTIES OF CACU3TI4O12 USING ENHANCED MICROWAVE PROCESSING | CO | 2022
  24. EFFECT OF HIGH CONCENTRATION OF AN IDEAL DONOR DOPANT ON THE DIELECTRIC PROPERTIES OF POTASSIUM SODIUM NIOBATE (KNN) LEAD-FREE PIEZOELECTRIC CERAMIC | CORRESPNDG | 2024-01
  25. RECYCLING OF METALLURGICAL STEEL SLAG WASTE AS PARTIAL REPLACEMENT OF RAW MATERIALS FOR SUSTAINABLE CLAY-BASED CERAMICS: A BRIEF REVIEW | CO | 2024-03
  26. A STUDY ON CALCIUM COPPER TITANATE (CCTO) FOR IMPROVEMENT OF DIELECTRIC RESONATOR ANTENNA (DRA) | CO | 2025-02-25
  27. EFFECT OF ANNEALING TEMPERATURE TO MECHANICAL PROPERTIES OF SODA LIME SILICA GLASS | CO | 2025-02-25
  28. DIELECTRIC BREAKDOWN STRENGTH AND ENERGY STORAGE DENSITY OF CCTO-ZBS ELECTROCERAMIC | CO | 2021-12
  29. EFFECT OF POTASSIUM SALT VARIATION AND ION EXCHANGE TEMPERATURE ON ANNEALED SODA LIME SILICA GLASS | CO | 2025
  1. AUGMENTATION OF THE DELAMINATION FACTOR IN DRILLING OF CARBON FIBRE REINFORCED POLYMER (CFRP) COMPOSITES | MEMBER | SGJP | 2017
  2. BIODEGRADABLE WATER-BASED DEGREASER | MEMBER | PPRN | 2017
  3. CHARACTERIZATION OF TWO DIFFERENT CULTIVARS OF DISCOREA HISPIDA DENNST. (UBI GADONG) AS A POTENTIAL FEEDSTOCK FOR ENERGY SOURCE. | MEMBER | SGJP | 2017
  4. CHILI SAUCE PROCESSING MACHINE | HEAD | PPRN | 2016
  5. DEVELOPMENT OF CACU3TI4O12 (CCTO) CAPACITOR PROTOTYPE AS GIANT DIELECTRIC CAPACITOR | HEAD | PRGS | 2020
  6. DEVELOPMENT OF CACU3TI4O12 (CCTO) CAPACITOR PROTOTYPE AS GIANT DIELECTRIC CAPACITOR | HEAD | PRGS | 2023
  7. DEVELOPMENT OF A PIEZOELECTRIC BASED POINT-OF-CARE BIOSENSOR FOR COVID-19 DETECTION | HEAD | KERAJAAN | 2023
  8. DEVELOPMENT OF A PIEZOELECTRIC BASED POINT-OF-CARE BIOSENSOR FOR COVID-19 DETECTION | HEAD | US EMBASSY | 2022
  9. ENHANCEMENT OF ELECTRICAL AND MICROSTRUCTURAL PROPERTIES OF BLENDE CERAMICS/POLYMER COMPOSITE | MEMBER | FRGS | 2014
  10. ENHANCEMENT MECHANISM OF DIELECTRIC PROPERTIES OF CACU3TI4O12 (CCTO) USING FORMULATED MICROWAVE SUSCEPTOR CRUCIBLE | MEMBER | FRGS | 2020
  11. FILLING AND CAPPING MACHINE OF MULTIPURPOSE SEASONING (PERENCAH SERBAGUNA) | MEMBER | PPRN | 2017
  12. HIGH ANTIMICROBIAL OF HYBRID BASED ON WASTE DYE /ZNO IN POLYURETHANE MATRIX | MEMBER | SGJP | 2017
  13. HIGH PERFORMANCE PLASMA ALUMINA COATING MATERIALS AND SUBSTRATES | HEAD | CRGUTM | 2020
  14. INKJET PRINTING ON CERAMIC | HEAD | PPRN | 2016
  15. MECHANISM OF GEOPOLYMERIZATION IN GREEN CERAMIC TILE INCORPORATED WITH ELECTRIC ARC FURNACE (EAF) STEEL SLAG WASTE | MEMBER | FRGS | 2020
  16. MECHANISM OF CHEMICAL STRENGTHENING BY SODA LIME SILICA GLASS USING ION EXCHANGE METHOD OF DIFFERENT POTASSIUM COMPOUND FOR GLASS PROPERTIES | MEMBER | FRGS | 2022
  17. PHASE FORMATION OF IN SITU ALUMINA-TITANIA-GRAPHITE NANOCOMPOSITE PRODUCED BY MACHANICAL ALLOYING | MEMBER | SGJP | 2017
  18. PORTABLE ROTI JOHN' MULTITASKING MACHINE | MEMBER | PPRN | 2017
  19. PREPARATION AND CHARACTERIZATION OF NANOEMULSIONS CONTAINING ESSENTIAL OIL PIPER BETLE AS THE ACTIVE INGREDIENT VIA LOW ENERGY EMULSIFICATION METHOD. | MEMBER | SGJP | 2017
  20. SINGGORA TILES SHAPING MACHINE | HEAD | PPRN | 2016
  21. STUDY ON THE MECHANISM OF GLASS ADDITIVES AS GRAIN INHIBITOR IN CACU3TI4O12 (CCTO) ELECTROCERAMICS | HEAD | FRGS | 2015
  22. SYNTHESIS AND CONSTRUCTING CAO-CUO-TIO2 TERNARY DIAGRAM AT THE VICINITY REGIONS OF CALCIUM COPPER TITANATE (CCTO) | HEAD | FRGS | 2020
  23. SYNTHESIS OF YBA2CU3O¿ PREPARED BY SOLID STATE REACTION, CO-PRECIPITATION AND SOL-GEL METHOS STUDY ON MICROSTRUCTURE AND SUPERCONDUCTING PROPERTIES | MEMBER | SGJP | 2016
  24. UTILIZATION OF NICOTIANA TABACUM STALKS-BASED XYLAN AND TAPIOCA STARCH COMPOSITE FILMS FOR ACTIVE FOOD PACKAGING | MEMBER | SGJP | 2017
  1. YAYASAN MAGHFIRAH | MEMBER | 2020
  2. PERUNDING KEPADA POLISI UPSI | MEMBER | 2020
AWARD(S)
  • Award Name: Anugerah Gemilang Universiti Tahun 2018 - Kategori Penyelidikan & Inovasi (2019)
    Awarded by: Universiti Malaysia Kelantan
  • Award Name: Anugerah Perkhidmatan Cemerlang Tahun 2017 (2018)
    Awarded by: Universiti Malaysia Kelantan
  • Award Name: Anugerah Gemilang Universiti tahun 2016 kategori Penerbitan (2017)
    Awarded by: Universiti Malaysia Kelantan
RESEARCH AWARD(S)
  • Product Name: GREEN GEOPOLYMER CERAMIC (GREENGC) MADE FROM ELECTRIC ARC FURNACE (EAF) STEEL SLAG WASTE
    Award: GOLD
    Role: Member
    Exhibition Name:citrex 2021
  • Product Name: GREEN POROUS CERAMIC THERMAL INSULATOR MADE FROM WOOD SAW DUST WASTE
    Award: GOLD
    Role: Member
    Exhibition Name:cri 2021
  • Product Name: Super capacitor CCTO
    Award: GOLD
    Role: HEAD
    Exhibition Name:CRI 2020
  • Product Name: GREEN GEOPOLYMER CERAMIC (GreenGC) MADE FROM ELECTRIC ARC FURCE (EAF) STEEL SLAG WASTE
    Award: GOLD
    Role: Member
    Exhibition Name:citrex
  • Product Name: GREEN POROUS CERAMIC THERMAL INSULATOR MADE FROM WOOD SAW DUST WASTE
    Award: SPECIAL
    Role: Member
    Exhibition Name:mte 2021
  • Product Name: GREEN POROUS CERAMIC THERMAL INSULATOR MADE FROM WOOD SAW DUST WASTE
    Award: SPECIAL
    Role: Member
    Exhibition Name:cri 2021
  • Product Name: GREEN POROUS CERAMIC THERMAL INSULATOR MADE FROM WOOD SAW DUST WASTE
    Award: SILVER
    Role: Member
    Exhibition Name:mte 2021
  • Product Name: GREEN GEOPOLYMER CERAMIC (GreenGC) MADE FROM ELECTRIC ARC FURCE (EAF) STEEL SLAG WASTE
    Award: SILVER
    Role: Member
    Exhibition Name:mte
  • Product Name: CCTO : FUTURE SUPER CAPACITOR
    Award: SILVER
    Role: HEAD
    Exhibition Name:MTE 2020
EDUCATION(S)
  • ()
    PROFESIONAL
  • (2007) UNIVERSITI SAINS MALAYSIA
    IJAZAH DOKTOR FALSAFAH ELEKTRO SERAMIK KEJURUTERAAN BAHAN
  • (2004) UNIVERSITI SAINS MALAYSIA
    IJAZAH SARJANA KEJURUTERAAN BAHAN
  • (2001) UNIVERSITI SAINS MALAYSIA
    IJAZAH SARJANA MUDA KEJURUTERAAN BAHAN
  • (1996) SEKOLAH MENENGAH DATO' MAHMOOD
    SPM
WORKING EXPERIENCE(S)
  • Lecturer | Universiti Malaysia Pahang
    01-Jun-2007-31-May-2008
  • Senior Lecturer | Universiti Sains Malaysia
    01-Aug-2008-14-Apr-2015
PROFESIONAL MEMBERSHIP(S)
  • LEMBAGA JURUTERA MALAYSIA | MEMBER | NATIONAL
    01-Jan-2024-01-Jan-2025
COURSES TAUGHT
Subject Code Description
EFT1163 INTRODUCTION TO MATERIAL SCIENCE
EFT2143 RESEARCH METHODOLOGY AND SCIENTIFIC WRITING
EME4293 GLASS TECHNOLOGY
EMT2102 CERAMIC MATERIALS IN INDUSTRY
EMT2122 MATERIAL TESTING AND ASSESMENT
EMT3153 MATERIALS CHARACTERIZATION
EMT3243 RESEARCH PROJECT I
EMT4198 INDUSTRIAL TRAINING
EMT4253 RESEARCH PROJECT II
JFT20302 STUDENT IN ENTERPRISE PROGRAMME
JLT11003 BASIC GEOLOGY
JLT21203 MINERAL DEPOSIT
SUPERVISION
  • A STUDY ON OCTO FOR IMPROVEMENT OF DIELECTRIC RESONATOR ANTENNAS | MAIN SUPERVISOR FOR A PHD'S STUDENT
  • EFFECTS OF THE TWO-STEP CONVENTIONAL SINTERING PARAMETERS ON BARIUM-DOPED-POTASSIUM SODIUM NIOBATE (KBNN) PIEZOELECTRIC PROPERTIES | MAIN SUPERVISOR FOR A PHD'S STUDENT
  • PROFILING THE PHYSICAL, CHEMICAL AND MECHANICAL PROPERTIES OF CLAY SOIL IN KELANTAN FOR CLAY BASED PRODUCTS SUITABILITY | MAIN SUPERVISOR FOR A PHD'S STUDENT
  • SUMBANGAN PENYERAPAN KARBON KE ATAS KONKRIT RINGAN BERTETULANG | MAIN SUPERVISOR FOR A PHD'S STUDENT
  • THE EFFECT OF TI MODIFICATION IN CACU3TI4012 ON DIELECTRIC PROPERTIES | MAIN SUPERVISOR FOR A MASTER'S STUDENT