Logo UMK Expert

TS. DR. MAZLAN BIN MOHAMED

FACULTY OF DATA SCIENCE AND COMPUTING
mazlan.m@umk.edu.my
09-9477264
PENSYARAH KANAN (TETAP)
Scopus Google Scholar

WOS CV
GROUP OF EXPERTISE
  1. A DISTRIBUTION OF HOMALOMENA GENUS (ARACEAE) USING THE ECOLOGICAL NICHE MODELING IN THE STATE OF KELANTAN, PENINSULAR MALAYSIA | CO | 2020-05-25
  2. THE EFFECT OF GRAPHENE ON THERMAL INTERFACE MATERIAL IN TERM OF THERMAL CONDUCTIVITY | MAIN | 2020-01
  3. COMPARISON BETWEEN CNT THERMAL INTERFACE MATERIALS WITH GRAPHENE THERMAL INTERFACE MATERIAL IN TERM OF THERMAL CONDUCTIVITY | MAIN | 2020
  4. ECOWOOD COMPOSITES MADE USING CITRIC-ACIDMODIFIED CORN AND OIL PALM STARCHES AS THE BINDER | CO | 2020-07-01
  5. CITRIC ACID-MODIFIED STARCH AS AN ENVIRONMENTALLY FRIENDLY BINDER FOR WOOD COMPOSITE MAKING | CO | 2020-05-01
  6. FORMATION OF ANTIHYPERLIPIDEMIC NANO-EZETIMIBE FROM VOLATILE MICROEMULSION TEMPLATE FOR ENHANCED DISSOLUTION PROFILE | CO | 2020-07-14
  7. IMPACT OF WATER ¿ BIODIESEL ¿ DIESEL NANO-EMULSION FUEL ON PERFORMANCE PARAMETERS AND DIESEL ENGINE EMISSION | CO | 2020-11-15
  8. IMPREGNATION OF LIQUID NATURAL RUBBER (LNR) FOAM WITH ACTIVATED CARBON FOR ENHANCING OIL REMOVAL FROM WATER | CO | 2020-05
  9. IMPROVING THE EFFICIENCY OF POST-DIGESTION METHOD IN EXTRACTING MICROPLASTICS FROM GASTROINTESTINAL TRACT AND GILLS OF FISH | CO | 2020-12
  10. IMPROVING WOOD DURABILITY AGAINST G. TRABEUM AND C. VERSICOLOR USING STARCH BASED ANTIFUNGAL COATING FROM DIOSCOREA HISPIDA SP. | CO | 2020-10
  11. NUMERICAL INVESTIGATION OF THE EFFECT OF INCORPORATED GUIDE VANE LENGTH WITH SCC PISTON FOR HIGH-VISCOSITY FUEL APPLICATIONS | CO | 2020-11
  12. PERFORMANCE ENHANCEMENT OF ENERGY SAVING AND MACHINING CHARACTERISTIC IN ELECTRICAL DISCHARGE MACHINING ON MAGNESIUM ALLOY: A REVIEW | CO | 2020
  13. NUMERICAL INVESTIGATION OF THE CHARACTERISTICS OF THE IN-CYLINDER AIR FLOW IN A COMPRESSION-IGNITION ENGINE FOR THE APPLICATION OF EMULSIFIED BIOFUELS | CO | 2020-11
  14. AUGMENTATION OF THE DELAMINATION FACTOR IN DRILLING OF CARBON FIBRE-REINFORCED POLYMER COMPOSITES (CFRP) | CO | 2020-11
  15. THERMAL EFFICIENCY ANALYSIS OF A NANOFLUID-BASED MICRO COMBINED HEAT AND POWER SYSTEM USING CNG AND BIOGAS | MAIN | 2021-09
  16. PERFORMANCE ENHANCEMENT OF A HYBRID PHOTOVOLTAIC-THERMAL-THERMOELECTRIC (PVT-TE) MODULE USING NANOFLUID-BASED COOLING: INDOOR EXPERIMENTAL TESTS AND MULTI-OBJECTIVE OPTIMIZATION | CO | 2021-08
  17. SAGO STARCH NANOCRYSTAL-STABILIZED PICKERING EMULSIONS: STABILITY AND RHEOLOGICAL BEHAVIOR | CO | 2021-07
  18. MICROBIAL FUEL CELL TECHNOLOGY¿A CRITICAL REVIEW ON SCALE-UP ISSUES | CO | 2021-06
  19. A REVIEW OF INDUSTRIAL WASTE HEAT RECOVERY SYSTEM FOR POWER GENERATION WITH ORGANIC RANKINE CYCLE: RECENT CHALLENGES AND FUTURE OUTLOOK | CO | 2021-03
  20. OPTIMIZATION AND INVESTIGATION THE EFFECTS OF USING BIODIESEL-ETHANOL BLENDS ON THE PERFORMANCE AND EMISSION CHARACTERISTICS OF A DIESEL ENGINE BY GENETIC ALGORITHM | CO | 2021-04
  21. A SYSTEMATIC REVIEW ON GRAPHENE-BASED NANOFLUIDS APPLICATION IN RENEWABLE ENERGY SYSTEMS: PREPARATION, CHARACTERIZATION, AND THERMOPHYSICAL PROPERTIES | CO | 2021-04
  22. APPLICATION OF GENERAL FULL FACTORIAL STATISTICAL EXPERIMENTAL DESIGN¿S APPROACH FOR THE DEVELOPMENT OF SUSTAINABLE CLAY-BASED CERAMICS INCORPORATED WITH MALAYSIA¿S ELECTRIC ARC FURNACE STEEL SLAG WASTE | CO | 2021-04
  23. MICROWAVE TECHNIQUE; ALTERNATIVE FOR SYNTHESIS CONVENTIONAL HETEROCYCLIC COMPOUNDS [KAEDAH GELOMBANG MIKRO; ALTERNATIF SINTESIS SEBATIAN HETEROSIKLIK KONVENSIONAL] | CO | 2021-04
  24. INVESTIGATING THE CONTRIBUTION OF CARBON NANOTUBES AND DIESEL-BIODIESEL BLENDS TO EMISSION AND COMBUSTION CHARACTERISTICS OF DIESEL ENGINE | CO | 2021-02
  25. STRUCTURE, PHYSICOCHEMICAL AND TOXICITY PROPERTIES OF UNDERUSED MALAYSIAN NATIVE TUBER'S STARCH (DIOSCOREA PENTAPHYLLA) | CO | 2021-09
  26. ENHANCING THE DECOLORIZATION OF METHYLENE BLUE USING A LOW-COST SUPER-ABSORBENT AIDED BY RESPONSE SURFACE METHODOLOGY | CO | 2021-08
  27. LIFE CYCLE ASSESSMENT (LCA) OF PARTICLEBOARD: INVESTIGATION OF THE ENVIRONMENTAL PARAMETERS | CO | 2021-09
  28. OCCURRENCE, DISTRIBUTION AND CHARACTERISTICS OF MICROPLASTICS IN GASTROINTESTINAL TRACT AND GILLS OF COMMERCIAL MARINE FISH FROM MALAYSIA | CO | 2021-12
  29. THE ROTOR-STATOR TYPE HYDRODYNAMIC CAVITATION REACTOR APPROACH FOR ENHANCED BIODIESEL FUEL PRODUCTION | CO | 2021-01
  30. ASSESSMENT OF A SOLAR-DRIVEN COGENERATION SYSTEM FOR ELECTRICITY AND DESALINATION | CO | 2021-08
  31. BIO-NANO EMULSION FUEL BASED ON GRAPHENE QUANTUM DOT NANOPARTICLES FOR REDUCING ENERGY CONSUMPTION AND POLLUTANTS EMISSION | CO | 2021-03
  32. PREDICTION OF POWER GENERATION AND ROTOR ANGULAR SPEED OF A SMALL WIND TURBINE EQUIPPED TO A CONTROLLABLE DUCT USING ARTIFICIAL NEURAL NETWORK AND MULTIPLE LINEAR REGRESSION | CO | 2021-05
  33. TIME-FREQUENCY ANALYSIS OF DIESEL ENGINE NOISE USING BIODIESEL FUEL BLENDS | CO | 2021-03
  34. HIDROGEL BERASASKAN PEKTIN KULIT BUAH NAGA (HYLOCEREUS POLYRHIZUS) SEBAGAI PEMBAWA UBAT MELALUI SISTEM PENGHANTAR ORAL [(PECTIN BASED HYDROGEL FROM DRAGON FRUIT PEELS (HYLOCEREUS POLYRHIZUS) AS DRUG CARRIER VIA ORAL DELIVERY SYSTEM)] | CO | 2021-11
  35. MACHINING OF CARBON FIBRE REINFORCED POLYMER COMPOSITES: A PRELIMINARY INVESTIGATION OF HIGH POWER FIBRE LASER [PEMESINAN KOMPOSIT POLIMER BERTETULANG GENTIAN KARBON: PENYELIDIKAN AWAL LASER SERAT BERKUASA TINGGI] | CO | 2021-09
  36. METHODS FOR IMPROVING THE IN-CYLINDER AIRFLOW CHARACTERISTICS FOR SUSTAINABLE TRANSPORTATION USING FUELS WITH HIGHER VISCOSITY: A REVIEW | CO | 2021
  37. THERMAL EFFICIENCY ANALYSIS OF THE PHASE CHANGE MATERIAL (PCM) MICROCAPSULES | MAIN | 2021-12
  38. ANALYTICAL STUDY OF THE IMPACT OF SOLIDITY, CHORD LENGTH, NUMBER OF BLADES, ASPECT RATIO AND AIRFOIL TYPE ON H-ROTOR DARRIEUS WIND TURBINE PERFORMANCE AT LOW REYNOLDS NUMBER | CO | 2022-03
  39. APPLYING SOLAR ENERGY IN THE COMBINATION OF SOLAR DRYER WITH OLIVE HARVESTING MACHINE TO REDUCE ENERGY LOSSES | CO | 2022-02
  40. MODELING FOR EXTRACTION OF OIL FROM WALNUT AND SESAME USING BATCH FLOW COLD PRESS OIL EXTRACTION SYSTEM | CO | 2022-04
  41. HYBRID SOLAR DESALINATION SYSTEM FOR GENERATION ELECTRICITY AND FRESHWATER WITH NANOFLUID APPLICATION: ENERGY, EXERGY, AND ENVIRONMENTAL ASPECTS | CO | 2022-03
  42. FLEXIBLE PHOTOVOLTAIC SYSTEM ON NON-CONVENTIONAL SURFACES: A TECHNO-ECONOMIC ANALYSIS | CO | 2022-03
  43. THE DIFFERENTIAL IMPACT OF VARIOUS INJECTION PRESSURES ON THE EXERGY OF A DIESEL ENGINE USING BIODIESEL-DIESEL FUEL BLENDS | CO | 2022-01
  44. REMOVAL OF CADMIUM USING ALKALINE-TREATED ACTIVATED CARBON FROM LEUCAENA LEUCOCEPHALA BIOMASS | CO | 2022
  45. FINITE ELEMENT ANALYSIS USING SOLIDWORK SOFTWARE ON INNOVATIVE ANTI-ANIMAL TRASH BIN | MAIN | 2022
  46. MINI REVIEW OF MICROPLASTIC POLLUTIONS AND ITS IMPACT ON THE ENVIRONMENT AND HUMAN HEALTH | CO | 2023-07
  47. EXERGY AND ENERGY ANALYSIS OF ORGANIC RANKINE CYCLE INTEGRATION IN THE CARBON BLACK INDUSTRY USING PINCH TECHNOLOGY | CO | 2023
  48. A NOVEL APPROACH OF SYNCHRONIZATION OF THE SUSTAINABLE GRID WITH AN INTELLIGENT LOCAL HYBRID RENEWABLE ENERGY CONTROL | MAIN | 2023
  49. MECHANICAL AND PHYSICAL PROPERTIES OF UNSATURATED POLYESTER REINFORCED KENAF CORE FIBER WITH HYBRID CELLULOSE NANOCRYSTAL (CNC) AND GRAPHENE NANOPLATELET(GNP) NANOFILLERS | MAIN | 2023
  50. STUDENT'S KNOWLEDGE IN SCIENCE: AN EVALUATION VIA HYDROPONIC KIT | CO | 2022
  51. THERMAL PROPERTIES OF UNSATURATED POLYESTER REINFORCED KENAF CORE FIBER WITH HYBRID NANOFILLERS OF CELLULOSE NANOCRYSTAL AND GRAPHENE NANOPLATELET | CO | 2023
  52. EPOXY-GRAPHENE COMPOSITE REINFORCED WITH BAMBOO BIOCHAR POWDER: EFFECT ON MECHANICAL PROPERTIES | MAIN | 2023
  53. IMPACT OF WATER ¿ BIODIESEL ¿ DIESEL NANO-EMULSION FUEL ON PERFORMANCE PARAMETERS AND DIESEL ENGINE EMISSION | CO | 2020-11-15
  54. IMPROVING THE EFFICIENCY OF POST-DIGESTION METHOD IN EXTRACTING MICROPLASTICS FROM GASTROINTESTINAL TRACT AND GILLS OF FISH | CO | 2020-12
  55. IMPROVING WOOD DURABILITY AGAINST G. TRABEUM AND C. VERSICOLOR USING STARCH BASED ANTIFUNGAL COATING FROM DIOSCOREA HISPIDA SP. | CO | 2020-10
  56. AUGMENTATION OF THE DELAMINATION FACTOR IN DRILLING OF CARBON FIBRE-REINFORCED POLYMER COMPOSITES (CFRP) | CO | 2020-11
  57. THERMAL EFFICIENCY ANALYSIS OF A NANOFLUID-BASED MICRO COMBINED HEAT AND POWER SYSTEM USING CNG AND BIOGAS | MAIN | 2021-09
  58. SAGO STARCH NANOCRYSTAL-STABILIZED PICKERING EMULSIONS: STABILITY AND RHEOLOGICAL BEHAVIOR | CO | 2021-07
  59. A REVIEW OF INDUSTRIAL WASTE HEAT RECOVERY SYSTEM FOR POWER GENERATION WITH ORGANIC RANKINE CYCLE: RECENT CHALLENGES AND FUTURE OUTLOOK | CO | 2021-03
  60. OPTIMIZATION AND INVESTIGATION THE EFFECTS OF USING BIODIESEL-ETHANOL BLENDS ON THE PERFORMANCE AND EMISSION CHARACTERISTICS OF A DIESEL ENGINE BY GENETIC ALGORITHM | CO | 2021-04
  61. INVESTIGATING THE CONTRIBUTION OF CARBON NANOTUBES AND DIESEL-BIODIESEL BLENDS TO EMISSION AND COMBUSTION CHARACTERISTICS OF DIESEL ENGINE | CO | 2021-02
  62. ENHANCING THE DECOLORIZATION OF METHYLENE BLUE USING A LOW-COST SUPER-ABSORBENT AIDED BY RESPONSE SURFACE METHODOLOGY | CO | 2021-08
  63. LIFE CYCLE ASSESSMENT (LCA) OF PARTICLEBOARD: INVESTIGATION OF THE ENVIRONMENTAL PARAMETERS | CO | 2021-09
  64. THE ROTOR-STATOR TYPE HYDRODYNAMIC CAVITATION REACTOR APPROACH FOR ENHANCED BIODIESEL FUEL PRODUCTION | CO | 2021-01
  65. BIO-NANO EMULSION FUEL BASED ON GRAPHENE QUANTUM DOT NANOPARTICLES FOR REDUCING ENERGY CONSUMPTION AND POLLUTANTS EMISSION | CO | 2021-03
  66. PREDICTION OF POWER GENERATION AND ROTOR ANGULAR SPEED OF A SMALL WIND TURBINE EQUIPPED TO A CONTROLLABLE DUCT USING ARTIFICIAL NEURAL NETWORK AND MULTIPLE LINEAR REGRESSION | CO | 2021-05
  67. METHODS FOR IMPROVING THE IN-CYLINDER AIRFLOW CHARACTERISTICS FOR SUSTAINABLE TRANSPORTATION USING FUELS WITH HIGHER VISCOSITY: A REVIEW | CO | 2022
  68. EXERGY AND ENERGY ANALYSIS OF ORGANIC RANKINE CYCLE INTEGRATION IN THE CARBON BLACK INDUSTRY USING PINCH TECHNOLOGY | CO | 2023
  69. CITRIC ACID-MODIFIED STARCH AS AN ENVIRONMENTALLY FRIENDLY BINDER FOR WOOD COMPOSITE MAKING | CO | 2020-05-01
  70. FORMATION OF ANTIHYPERLIPIDEMIC NANO-EZETIMIBE FROM VOLATILE MICROEMULSION TEMPLATE FOR ENHANCED DISSOLUTION PROFILE | CO | 2020-07-14
  71. NUMERICAL INVESTIGATION OF THE EFFECT OF INCORPORATED GUIDE VANE LENGTH WITH SCC PISTON FOR HIGH-VISCOSITY FUEL APPLICATIONS | CO | 2020-11
  72. NUMERICAL INVESTIGATION OF THE CHARACTERISTICS OF THE IN-CYLINDER AIR FLOW IN A COMPRESSION-IGNITION ENGINE FOR THE APPLICATION OF EMULSIFIED BIOFUELS | CO | 2020-11
  73. PERFORMANCE ENHANCEMENT OF A HYBRID PHOTOVOLTAIC-THERMAL-THERMOELECTRIC (PVT-TE) MODULE USING NANOFLUID-BASED COOLING: INDOOR EXPERIMENTAL TESTS AND MULTI-OBJECTIVE OPTIMIZATION | CO | 2021-08
  74. A SYSTEMATIC REVIEW ON GRAPHENE-BASED NANOFLUIDS APPLICATION IN RENEWABLE ENERGY SYSTEMS: PREPARATION, CHARACTERIZATION, AND THERMOPHYSICAL PROPERTIES | CO | 2021-04
  75. STRUCTURE, PHYSICOCHEMICAL AND TOXICITY PROPERTIES OF UNDERUSED MALAYSIAN NATIVE TUBER'S STARCH (DIOSCOREA PENTAPHYLLA) | CO | 2021-09
  76. TIME-FREQUENCY ANALYSIS OF DIESEL ENGINE NOISE USING BIODIESEL FUEL BLENDS | CO | 2021-03
  77. ANALYTICAL STUDY OF THE IMPACT OF SOLIDITY, CHORD LENGTH, NUMBER OF BLADES, ASPECT RATIO AND AIRFOIL TYPE ON H-ROTOR DARRIEUS WIND TURBINE PERFORMANCE AT LOW REYNOLDS NUMBER | CO | 2022-03
  78. APPLYING SOLAR ENERGY IN THE COMBINATION OF SOLAR DRYER WITH OLIVE HARVESTING MACHINE TO REDUCE ENERGY LOSSES | CO | 2022-02
  79. MODELING FOR EXTRACTION OF OIL FROM WALNUT AND SESAME USING BATCH FLOW COLD PRESS OIL EXTRACTION SYSTEM | CO | 2022-04
  80. HYBRID SOLAR DESALINATION SYSTEM FOR GENERATION ELECTRICITY AND FRESHWATER WITH NANOFLUID APPLICATION: ENERGY, EXERGY, AND ENVIRONMENTAL ASPECTS | CO | 2022-03
  81. FLEXIBLE PHOTOVOLTAIC SYSTEM ON NON-CONVENTIONAL SURFACES: A TECHNO-ECONOMIC ANALYSIS | CO | 2022-03
  82. THE DIFFERENTIAL IMPACT OF VARIOUS INJECTION PRESSURES ON THE EXERGY OF A DIESEL ENGINE USING BIODIESEL-DIESEL FUEL BLENDS | CO | 2022-01
  83. MINI REVIEW OF MICROPLASTIC POLLUTIONS AND ITS IMPACT ON THE ENVIRONMENT AND HUMAN HEALTH | CO | 2023-07
  84. A NOVEL APPROACH OF SYNCHRONIZATION OF THE SUSTAINABLE GRID WITH AN INTELLIGENT LOCAL HYBRID RENEWABLE ENERGY CONTROL | CO | 2023
  85. MICROBIAL FUEL CELL TECHNOLOGY¿A CRITICAL REVIEW ON SCALE-UP ISSUES | CO | 2021-06
  86. A DISTRIBUTION OF HOMALOMENA GENUS (ARACEAE) USING THE ECOLOGICAL NICHE MODELING IN THE STATE OF KELANTAN, PENINSULAR MALAYSIA | CO | 2020-05-25
  87. ECOWOOD COMPOSITES MADE USING CITRIC-ACIDMODIFIED CORN AND OIL PALM STARCHES AS THE BINDER | CO | 2020-07-01
  88. IMPREGNATION OF LIQUID NATURAL RUBBER (LNR) FOAM WITH ACTIVATED CARBON FOR ENHANCING OIL REMOVAL FROM WATER | CO | 2020-05
  89. MACHINING OF CARBON FIBRE REINFORCED POLYMER COMPOSITES: A PRELIMINARY INVESTIGATION OF HIGH POWER FIBRE LASER [PEMESINAN KOMPOSIT POLIMER BERTETULANG GENTIAN KARBON: PENYELIDIKAN AWAL LASER SERAT BERKUASA TINGGI] | CO | 2021-09
  90. REMOVAL OF CADMIUM USING ALKALINE-TREATED ACTIVATED CARBON FROM LEUCAENA LEUCOCEPHALA BIOMASS | CO | 2022
  1. EFFECT OF PLASMA FLOW IN PLASMA MIG WELDING PROCESS TO THE MICROSTRUCTURE REFINEMENT AT HEAT AFFECTED ZONE OF AS-WELDED CARBON STEEL | CO | 2020
  2. PREPARATION AND CHARACTERIZATION OF CALCIUM HYDROXYPHOSPHATE (HYDROXYAPATITE) FROM TILAPIA FISH BONES AND SCALES VIA CALCINATION METHOD | CO | 2020
  3. PARTICLEBOARD BASED ON GLUTARDIALDEHYDE TREATED OIL PALM TRUNK PARTICLES MADE AT DIFFERENT PRESSING TEMPERATURES | CO | 2020
  4. COPPER ALLOY REINFORCED BY GRAPHENE BY POWDER METALLURGY TECHNIQUE | CO | 2020-03
  5. EFFECT OF CHEMICAL TREATMENT ON MECHANICAL AND PHYSICAL PROPERTIES OF NON-WOVEN KENAF FIBER MAT REINFORCED POLYPROPYLENE BIOCOMPOSITES | CO | 2020-03
  6. MECHANICAL AND PHYSICAL PROPERTIES OF NON-WOVEN KENAF FIBRE MAT REINFORCED POLYPROPYLENE COMPOSITES PREPARED BY COMPRESSION MOLDING | CO | 2020-03
  7. MECHANICAL PROPERTIES OF COCONUT SHELL REINFORCED UNSATURATED POLYESTER COMPOSITES WITH THE PRESENCE OF TITANIUM DIOXIDE AS ADDITIONAL FILLER | CO | 2020-03
  8. THE EFFECT OF TITANIUM DIOXIDE TO ENHANCE PHYSICAL PROPERTIES OF COCONUT SHELL REINFORCED UNSATURATED POLYESTER COMPOSITES | CO | 2020-03
  9. MECHANICAL AND THERMAL PROPERTIES OF HYBRID NON-WOVEN KENAF FIBRE MAT-GRAPHENE NANOPLATELETS REINFORCED POLYPROPYLENE COMPOSITES | CO | 2020
  10. EFFECT OF PORTIONS AND PARTICLE SIZES ON PROXIMATE PROPERTIES OF OIL PALM FRONDS | CO | 2020-12-28
  11. PRELIMINARY INVESTIGATION OF DELAMINATION FACTOR FOR DRILLING WOOD PLASTIC COMPOSITES (WPC) | CO | 2020-12-28
  12. EFFECTS ON MAPP COMPATIBILIZER ON MECHANICAL PROPERTIES OF KENAF CORE FIBRE/GRAPHENE NANOPLATELETS REINFORCED POLYPROPYLENE HYBRID COMPOSITES | CO | 2020-12-28
  13. PREPARATION CHARACTERIZATION OF MICROCRYSTALLINE CELLULOSE FROM AGRICULTURE WASTE | CO | 2020-12-28
  14. RECYCLING OF PINEAPPLE (ANANAS COMOSUS) LEAF AGRO-WASTE AS ONE OF THE RAW MATERIALS FOR PRODUCTION OF ECO-FRIENDLY NEW PAPER | CO | 2020-12-28
  15. RECYCLING OF WOOD SAW DUST WASTE AS GREEN PORE FORMING AGENT FOR POROUS CERAMIC | CO | 2020-12-28
  16. SYNTHESIS OF ZINC OXIDE NANOSTRUCTURES GROWTH BY THE ROLE OF PH VARIATION | CO | 2020-12-28
  17. SPENT COFFEE GROUND AS LOW-COST ADSORBENT FOR CONGO RED DYE REMOVAL FROM AQUEOUS SOLUTION | CO | 2021-05
  18. FAILURE MODE AND EFFECTS ANALYSIS (FMEA) OF FURNITURE PRODUCTION: A CASE STUDY IN KELANTAN STATE, MALAYSIA | CO | 2021-05
  19. COMPARISON OF ULTRASOUND ASSISTED EXTRACTION AND CONVENTIONAL EXTRACTION TECHNIQUE ON RECOVERY OF PHENOLIC AND FLAVONOID COMPOUNDS FROM ALOE BARBADENSIS MILLER | CO | 2021-05
  20. MORPHOLOGICAL PROPERTIES OF CASSAVA FILM INFLUENCE BY PLASTICIZERS IN ZINC-AIR FUEL CELL | CO | 2021-05
  21. A NOVEL INNOVATION DESIGN OF ADVANCED SUBLIMATION PRINTING MACHINE | CO | 2021-05
  22. FOURIER TRANSFORM INFRARED SPECTROSCOPY OF THE WOOD COMPOSITE FROM NEOLAMARCKIA CADAMBA AND ENDOSPERMUM DIADENUM FOR PARTICLEBOARD APPLICATION | CO | 2021-05
  23. DESIGN OPTIMIZATION OF FORMULA STUDENT CAR STEERING KNUCKLE | CO | 2021
  24. THERMAL PROPERTIES OF THE GRAPHENE OXIDE (GO) REINFORCED EPOXY COMPOSITES (THERMAL ADHESIVE LIQUID TYPE): APPLICATION OF THERMAL INTERFACE MATERIALS | MAIN | 2021
  25. EFFECT OF CHEMICAL TREATMENT ON MECHANICAL AND MORPHOLOGICAL PROPERTIES OF SUGARCANE BAGASSE REINFORCED UNSATURATED POLYESTER COMPOSITE | CO | 2022
  26. EFFECT OF GRAPHENE ON MECHANICAL AND MORPHOLOGICAL PROPERTIES OF COCONUT SHELL REINFORCED UNSATURATED POLYESTER COMPOSITE | CO | 2022
  27. PRELIMINARY CHARACTERIZATION OF METHANOLIC AND ETHANOLIC EXTRACT OF MUSA ACUMINATA LEAVES | CO | 2022
  28. MODIFICATION OF ACTIVATED CARBON WITH CATIONIC SURFACTANT FOR HEAVY METALS REMOVAL | CO | 2022
  29. MODIFICATION OF ACTIVATED CARBON WITH ANIONIC SURFACTANT FOR DYE REMOVAL | CO | 2022
  30. LEUCAENA LEUCOCEPHALA BIOMASS TREATED WITH SODIUM DODECYLBENZENE SULFONATE (SDBS) AS AN ADSORBENT FOR MALACHITE GREEN UPTAKE FROM CONTAMINATED WATER | CO | 2022
  31. MECHANICAL AND PHYSICAL PROPERTIES OF UNSATURATED POLYESTER REINFORCED KENAF CORE FIBER WITH HYBRID CELLULOSE NANOCRYSTAL (CNC) AND GRAPHENE NANOPLATELET(GNP) NANOFILLERS | CORRESPNDG | 2022
  32. A NEW APPROACH OF STUDY TOWARDS ENVIRONMENTAL IMPACT ASSESSMENT FOR SUSTAINABLE PRODUCT DESIGN | CO | 2023
  33. ESTIMATION OF RIVER BATHYMETRY AND SPATIAL DISTRIBUTION OF PRECIPITATION AND THEIR UNCERTAINTIES | CO | 2023
  34. A STUDY ON MODELLING AND ANALYSIS OF 6-DOF INDUSTRIAL ROBOT USING ADAMS | MAIN | 2023
  35. WOOD COMPOSITE FROM HEVEA BRASILIENSIS SAWDUST AND THERMOPLASTIC STARCH | CO | 2024-03-21
  36. EFFECT OF PRESSING TIME ON THE PROPERTIES OF PARTICLEBOARD MADE USING GLUTARALDEHYDE-TREATED OIL PALM PARTICLE | CO | 2024-03-21
  37. EVALUATION OF THE EFFECT OF UREA AS PLASTICIZER ON THE PROPERTIES OF GLUTARDIALDEHYDE MODIFIED STARCH | CO | 2024-03
  38. PREDICTION OF CUTTING FORCES FOR MACHINE TOOLS BY NEURAL NETWORKS | CO | 2024
  39. REMOVAL OF CADMIUM USING ALKALINE-TREATED ACTIVATED CARBON FROM LEUCAENA LEUCOCEPHALA BIOMASS | CO | 2024-03
  40. RUBBERIZED GLUTARDIALDEHYDE MODIFIED STARCH PLASTICIZED WITH ETHYLENE GLYCOL | CO | 2024-03
  41. SHORT REVIEW ON THE POTENTIAL OF FIBER REINFORCED POLYMER (FRP) AS A NEW MATERIAL IN MAKING MONKEY TRAPS IN MALAYSIA | CO | 2024
  1. DETERMINATION OF SELECTED HEAVY METALS CONCENTRATION IN SOIL ALONG THE EAST-WEST HIGHWAY ROAD SHOULDER IN FRONT OF UMK JELI CAMPUS, JELI, KELANTAN, MALAYSIA | CO | 2020
  2. AI SPECTRUM BULLETIN | CO | 2023
  1. 3D PRINTING OF UV-CURABLE POLYURETHANE INCORPORATED WITH GRAPHENE OXIDE-AG NANOCOMPOSITE FILM | MEMBER | UMKRS | 2020
  2. A PROTOTYPE DEVELOPMENT OF HUMAN ELEPHANT CONFLICT RECORD (HEROC) APPLICATION FOR PERHILITAN | MEMBER | PRGS | 2021
  3. ANTI MONKEY RECYCLE BIN | MEMBER | TSFAS | 2020
  4. BIODEGRADABLE WATER-BASED DEGREASER | MEMBER | PPRN | 2017
  5. CHARACTERIZATION OF SYNTHESIZED POLY(LACTIC) ACID, TITANIUM OXIDE AND TALC NANOCOMPOSITE | MEMBER | RAGS | 2013
  6. FUNDAMENTAL STUDY OF AN ALTERNATIVE LIQUID FUEL EMULSION SPRAY MODELLING IN COMPRESSION-IGNITION ENGINE | HEAD | FRGS | 2021
  7. FUNDAMENTAL STUDY OF AN ALTERNATIVE LIQUID FUEL EMULSION SPRAY MODELLING IN COMPRESSION-IGNITION ENGINE | HEAD | UMK-FUND | 2021
  8. HIGH MIXING SPEED VACUUM EMULSIFYING MACHINE USING HIGH GRADE STAINLESS STEEL WITH TOP QUALITY FINISHING | HEAD | GRANT(I/A) | 2022
  9. IMPROVING THE GOLD ENGRAVING PROCESS BY ADOPTING A LASER MACHINE TECHNOLOGY | MEMBER | UMK-FUND | 2020
  10. INVESTIGATION ON CURING MECHANISMS AND PROPERTIES OF THERMOSETTING POLYMER FROM CHEMICALLY MODIFIED STARCH | MEMBER | RAGS | 2015
  11. MEMBANGUNAN MESIN MEMBENTUK ISIPADU (DOH) GLUTINOUS RICE | MEMBER | PPRN | 2020
  12. PEMINDAHAN TEKNOLOGI JAHITAN KEPADA GOLONGAN ISI RUMAH KATEGORI B40 DI KELANTAN | MEMBER | UMK-FUND | 2020
  13. PORTABLE ROTI JOHN' MULTITASKING MACHINE | MEMBER | PPRN | 2017
  14. PROGRAM ¿INNOVATION FOR COMMUNITY (INNO4C)¿ FOR INTEGRATED BAMBOO PROCESSING | MEMBER | LRGS | 2020
  15. RAPID MICROWAVE SYNTHESIS OF REDUCED GRAPHENE OXIDE UNIFORMLY DECORATED WITH SILVER NANOPARTICLES FOR OPTICAL DETECTION OF MERCURY IONS | MEMBER | UMK-FUND | 2020
  16. SISTEM PENANAMAN MENEGAK MAMPAN UGD DI SEKOLAH NEGERI SELANGOR | MEMBER | KERAJAAN | 2022
  17. SOLID STATE THERMAL ANALYSIS OF THERMAL INTERFACE MATERIAL FROM NANO-SILVER (RAGS) | MEMBER | SGPL-MYRA | 2016
  18. TISC-TECH FOR BANANA SEDDLINGS | MEMBER | PPRN | 2017
  19. UMK ¿MOF SOCIAL ENTERPRISE PROJECT | MEMBER | MOF | 2020
  1. DOUBLE AUGER TYPES POWDER FILLING MACHINE | HEAD | 2020
  2. USE OF ACTIV-BIOCARBON AS ACTIVE INGREDIENT FOR MULTIFUNCTIONAL EFFECT IN PERSONAL CARE PRODUCTS | MEMBER | 2020
  3. MEMBANGUNAN MESIN MEMBENTUK ISIPADU (DOH) GLUTINOUS RICE | MEMBER | 2020
  4. PROGRAM KEUSAHAWANAN IMPAK TINGGI | MEMBER | 2021
  5. MEMBANGUNKAN SEBUAH MESIN MEMBENTUK LSIPADU (DOH) GLUTINOUS RFCE SECARA KAWATAN AUTOMATIK BERKAPASITI TINGGI UNTUK PRODUK POP-RICE | MEMBER | 2021
  6. DOUBLE AUGER TYPES POWDER FILLING MACHINE | HEAD | 2021
  7. FIRST SCHEDULE ENVIRONMENT IMPACT ASSESSMENT (EIA) FOR "PROJEK MEMBINA DAN MENYIAPKAN TANGKI IMBANGAN BERKAPASITI 106.0JL DI KAWASAN PERINDUSTRIAN GABENG, KUANTAN, PAHANG DARUL MAKMUR" FOR PENGURUSAN AIR PAHANG BERHAD (PAIP) | MEMBER | 2022
  8. FIRST SCHEDULE ENVIRONMENT IMPACT ASSEEEMENT (EIA) FOR ' FIRST SCHEDULE ENVIRONMENTAL IMPACT ASSESSMENT FOR KUALA LUMPUR NORTHERN DISPERSAL EXPRESSWAY (KL-NODE) | MEMBER | 2022
  9. 2ND SCHEDULE ENVIRONMENTAL IMPACT ASSESSMENT (EIA) FOR THE PROPOSED NEW TIOMAN AIPORT CODE 4C, PULAU TIOMAN, PAHANG | MEMBER | 2022
AWARD(S)
  • Award Name: Anugerah Perkhidmatan Cemerlang (APC) Tahun 2021 (2022)
    Awarded by: Universiti Malaysia Kelantan
  • Award Name: Anugerah Gemilang Universiti tahun 2019 kategori Perundingan (2020)
    Awarded by: Universiti Malaysia Kelantan
  • Award Name: Anugerah Gemilang UMK Tahun 2014 (2015)
    Awarded by: Universiti Malaysia Kelantan
  • Award Name: Anugerah Perkhidmatan Cemerlang (2011)
    Awarded by: Universiti Teknologi MARA (UiTM) Pulau Pinang
RESEARCH AWARD(S)
  • Product Name: MODIFIED GRAPHENE THERMAL INTERFACE MATERIAL
    Award: GOLD
    Role: HEAD
    Exhibition Name:CIGIF 2020, KOREA
  • Product Name: Integrated Solar Dryer (INSOLER)
    Award: GOLD
    Role: Member
    Exhibition Name:IENA , German
  • Product Name: NSP: INNOVATION DESIGN OF SUBLIMATION PRINTING MACHINE
    Award: GOLD
    Role: Member
    Exhibition Name:IPITEX 2023
  • Product Name: B-CAPS
    Award: GOLD
    Role: Member
    Exhibition Name:Pecipta 2022
  • Product Name: FAST POWDER FILLING MACHINE USING TWIN HOPPER
    Award: GOLD
    Role: Head
    Exhibition Name:IIDEX 2022
  • Product Name: FAST POWDER FILLING MACHINE USING TWIN HOPPER
    Award: GOLD
    Role: Head
    Exhibition Name:MTE 2022
  • Product Name: FAST POWDER FILLING MACHINE USING TWIN HOPPER
    Award: GOLD
    Role: Head
    Exhibition Name:IComPex2022
  • Product Name: Double Auger Type Powder Filling Machine (Serve Motor) with Stainless Steel
    Award: GOLD
    Role: Head
    Exhibition Name:ITEX 2021
  • Product Name: MODIFIED GRAPHENE THERMAL INTERFACE MATERIAL
    Award: GOLD
    Role: Head
    Exhibition Name:INTERNATIONAL INNOVATION, CREATIVITY & TECHNOLOGY EXHIBTTION (i2CreaTE 2021)
  • Product Name: Innovation Design of Sublimation Printing Machine
    Award: GOLD
    Role: Member
    Exhibition Name:ITEX 2020
  • Product Name: Innovation Design of Sublimation Printing Machine
    Award: GOLD
    Role: Member
    Exhibition Name:EREKA 2020
  • Product Name: Innovation Design of Sublimation Printing Machine
    Award: GOLD
    Role: Member
    Exhibition Name:Borneo Innovation Festival 2020
  • Product Name: Double Auger Type Powder Filling Machine (Serve Motor) with Stainless Steel
    Award: GOLD
    Role: Head
    Exhibition Name:CRI 2019 (Event Feb 2020)
  • Product Name: FAST FILLINDER MACHINE IN HOPPER
    Award: GOLD
    Role: Head
    Exhibition Name:IPITEX 2023
  • Product Name: New Anti-Vibration Powder Filling Machine
    Award: SPECIAL
    Role: Head
    Exhibition Name:World Invention Innovation Contest (WIC 2021)
  • Product Name: Cellulose Acetate From Etlingera Coccinea For Dye Removal And Filler Applications
    Award: SPECIAL
    Role: Head
    Exhibition Name:World Invention Innovation Contest (WIC 2021)
  • Product Name: MODIFIED GRAPHENE THERMAL INTERFACE MATERIAL
    Award: SPECIAL
    Role: HEAD
    Exhibition Name:CIGIF 2020, KOREA
  • Product Name: Mechanical and Thermal Properties of Cellulose Nanocrystal and Graphene Nanoplatelets as Hybrid Nanofillers for Poly(lactic) Acid Biocomposit
    Award: SPECIAL
    Role: Head
    Exhibition Name:World Invention Innovation Contest (WIC 2021)
  • Product Name: INSOLER
    Award: SPECIAL
    Role: Member
    Exhibition Name:Pecipta 2022
  • Product Name: FAST POWDER FILLING MACHINE USING TWIN HOPPER
    Award: SPECIAL
    Role: Head
    Exhibition Name:EREKA 2022
  • Product Name: Biocomposite Materials To Enhance The Durability Of Selected Wood Species (Intsia Palembanica Miq, Neobalanocarpus Heimii, Shorea Plagata) In Malaysia
    Award: SPECIAL
    Role: Head
    Exhibition Name:World Invention Innovation Contest (WIC 2021)
  • Product Name: FAST POWDER FILTING MACHINE USING TWIN HOPPER
    Award: SPECIAL
    Role: Head
    Exhibition Name:INTERNATIONAL INNOVATION, CREATIVITY & TECHNOLOGY EXHIBTTION (i2CreaTE 2021)
  • Product Name: MODIFIED GRAPHENE THERMAL INTERFACE MATERIAL
    Award: SPECIAL
    Role: Head
    Exhibition Name:World Invention Innovation Contest (WIC 2021)
  • Product Name: Innovation Design of Sublimation Printing Machine
    Award: SPECIAL
    Role: Member
    Exhibition Name:Borneo Innovation Festival 2020
  • Product Name: Waste to wealth
    Award: SILVER
    Role: Member
    Exhibition Name:CRI 2019 (Event Feb 2020)
  • Product Name: FAST POWDER FILLING MACHINE USING TWIN HOPPER
    Award: SILVER
    Role: Head
    Exhibition Name:MTE SDG 2022
  • Product Name: SMART POWDER DUO-FILL: AI POWER TWIN HOPPER FILLING SYSTEM
    Award: SILVER
    Role: Head
    Exhibition Name:RISE 2023
  • Product Name: Double Auger Type Powder Filling Machine (Serve Motor) with Stainless Steel
    Award: SILVER
    Role: HEAD
    Exhibition Name:International Engineering Invention & Innovation Exhibition (Pi-ENVEX 2020)
  • Product Name: Integrated Solar Dryer (INSOLER)
    Award: SILVER
    Role: Member
    Exhibition Name:RISE 2023
EDUCATION(S)
  • (2020) UNIVERSITI MALAYSIA PERLIS
    IJAZAH DOKTOR FALSAFAH MECHANICAL ENGINEERING
  • (2010) UNIVERSITI SAINS MALAYSIA
    IJAZAH SARJANA MECHANICAL ENGINEERING MECHANICAL ENGINEERING
  • (1998) SEKOLAH MENENGAH PUTRI SA'DONG
    SPM
WORKING EXPERIENCE(S)
  • Lecturer | UiTM Campus Permatang Pauh, P.Pinang
    02-Jul-2006-01-Jul-2007
  • Lecturer | UiTM Campus Permatang Pauh, P.Pinang
    02-Jul-2007-15-Mar-2011
  • Lecturer | UiTM Campus Permatang Pauh, P.Pinang
    16-Mar-2011-01-May-2013
PROFESIONAL MEMBERSHIP(S)
  • PERSATUAN JURUTERA | MEMBER | NATIONAL
    27-Feb-2007-27-Feb-2106
  • LEMBAGA JURUTERA MALAYSIA | MEMBER | NATIONAL
    27-Feb-2007-27-Feb-2106
  • LEMBAGA TEKNOLOGIS MALAYSIA | MEMBER | NATIONAL
    13-Mar-2018-13-Mar-2117
COURSES TAUGHT
Subject Code Description
EFT1103 BASIC PHYSICS
EFT1252 COMPUTER APPLICATION IN DESIGN
EFT2143 RESEARCH METHODOLOGY AND SCIENTIFIC WRITING
EME2183 COMPOSITE MATERIALS IN MANUFACTURING
EME2283 MATERIAL RECYCLING TECHNOLOGY
EMT3162 MATERIALS TECHNOLOGY IN BUSINESS ENVIRONMENT
EMT3243 RESEARCH PROJECT I
EMT3323 ADVANCES IN MATERIALS TECHNOLOGY
EMT4198 INDUSTRIAL TRAINING
EMT4253 RESEARCH PROJECT II
EWE33103 PAPER PACKAGING TECHNOLOGY
EWT3134 WOOD AND NON-WOOD PROCESSING TECHNOLOGY
EWT3163 RESEARCH PROJECT I
FFT2074 BIOMETRY AND EXPERIMENTAL DESIGN
JFT10303 INDUSTRIAL REVOLUTION 4.0
JFT20302 STUDENT IN ENTERPRISE PROGRAMME
JIE31804 ARTIFICIAL INTELLIGENCE IN PRACTICE I
JIE32104 CAPSTONE II
JIE32602 CAPSTONE I
JIT10303 MATHEMATICAL COMPUTING
JIT20803 LINEAR ALGEBRA
JIT21203 STATISTIC AND PROBABILITY
JIT21303 INTERNET-OF-THINGS
JIT32302 FINAL YEAR PROJECT I
JIT42504 FINAL YEAR PROJECT II
SUPERVISION
  • Comparative Classification of Groundwater for Household Consumption Feasibility in DKI Jakarta and Bangka Belitung Using Support Vector Machines (SVM) | MAIN SUPERVISOR FOR A PHD'S STUDENT
  • ENHANCING MONKEY TRAP: ADVANCE DESIGN FOR OPTIMAL USE BY PERHILITAN | CO SUPERVISOR FOR A MASTER'S STUDENT
  • MECHANICAL AND THERMAL PROPERTIES OF CELLULOSE NANOCRYSTAL FOR POLY (LASTIC ACID BIO-COMPOSITE) | MAIN SUPERVISOR FOR A MASTER'S STUDENT
  • MECHANICAL, PHYSICAL AND THERMAL PROPERTIES OF KENAF FIBRE MAT/CELLULOSE NANO CRYSTAL/ GRAPHENE NANO PLATELETS REINFORCED UNSATURATED POLYESTER RESIN BIOCOMPOSITES | CO SUPERVISOR FOR A MASTER'S STUDENT
  • Machine Learning Guided Optimization Of User Interface Design Using Eye- Tracking Data For Enhanced Usability | MAIN SUPERVISOR FOR A PHD'S STUDENT
  • PENERAPAN ARTIFICIAL NEUREL NETWORK UNTUK MENGIDENTIFIKASI POLA SERANGAN DENGAN INTRUSION DETECTION SYSTEM | CO SUPERVISOR FOR A PHD'S STUDENT
  • PLA REINFORCED CNC/GNP HYBRID NANO FILLERS: MECHANICAL, PHYSICAL AND THERMAL PROPERTIES | CO SUPERVISOR FOR A MASTER'S STUDENT
  • Research On Medical Image Segmentation Based On Computer Vision | MAIN SUPERVISOR FOR A PHD'S STUDENT
  • SINGLE CELL ENCAPSULATION OF AZADIRACHTA INDICA EXTRACT VIA PICKERING EMULSION FOR BIOPESTICIDE APPLICATIONS | MAIN SUPERVISOR FOR A MASTER'S STUDENT
  • STUDY OF ZNO CONCENTRATION ON PVA/CELLULOSE CRYSTAL/ZNO NANOCOMPOSITE FOR POTENTIAL OPTICAL SENSOR APPLICATION. | CO SUPERVISOR FOR A MASTER'S STUDENT
  • TOWARDS THE DEVELOPMENTS OF MULTI-ADJUVANTED NANOLIPOSOMES ENCAPSULATED WITH PEPTIDE AS AN EFFECTIVE VACCINE DELIVERY PLATFORM AGAINST CAPRINE MASTITIS. | CO SUPERVISOR FOR A PHD'S STUDENT